made in Austria
RAPID® Dual
Discontinued item - Successor - "the new RAPID"
Due to necessities of production RAPID DUAL is still available in certain diameters and will be shipped till end of stock.
RAPID® Dual is a premium replacement for DIN 571 screws and offers significant advantages.
It is available in sizes from 8x50 to 12x400 mm.
Due to necessities of production RAPID DUAL is still available in certain diameters and will be shipped till end of stock.
RAPID® Dual is a premium replacement for DIN 571 screws and offers significant advantages.
It is available in sizes from 8x50 to 12x400 mm.
Dual head
Combination of TX drive and hex drive35°-tip
for fast biteBetter force transmission
with hex driveProduct features
RAPID® Dual
1 | Head geometry
- Patented cone underneath head for optimum centring when washer are used
- Head rests flat on metal with 90° screw connection
- Better force transmission with hex drive possible
- The commercially available TX drive saves you time-consuming tool change
2 | Friction part
The friction part reduces screwing resistance.
3 | Thread
Sharp rolled thread flanks for minimised blast effect and fast screwing-in.
4 | Tip
Application possibilities of RAPID® Dual
Elevated post base fixingsThe RAPID® Dual or RAPID® SuperSenkFix screws with their rein-forced underhead-design are creating a centering effect, while also contributing best application results using together with metal sheets.
With 700 hours corrosion resistance the RAPID® SuperSenkFix offers a high level of safety.
Info: in all weathered areas (service class 3) stainless steel or hot-dip-galvanised construction screws are recommended to use.
Metal sheet connection
The RAPID® Dual or RAPID® SuperSenkFix screws with their rein-forced underhead-design are creating a centering effect.
Best application results are also contributed in combination with metal sheets.
With 700 hours corrosion resistance the RAPID® SuperSenkFix offers a high level of safety.
Info: in all weathered areas (service class 3) stainless steel or hot-dip-galvanised construction screws are recommended to use.
Advantages over DIN 571 screw
- Higher extraction values
- Higher traction values
- Smaller penetration torque
- Higher hardness values
- Approved for structures according to ETA 12/0373
Request now
Rufen Sie uns an!
Schreiben Sie uns!
