RAPID® SuperSenkFix
Clean, flush countersinking in connections with high pull-through values
- Ideal for visible screw connections
- Perfect fit in steel bores
Ø 6.0 x 80 to 300 mm
Ø 8.0 x 80 to 400 mm
Ø 10.0 x 120 to 400 mm

Features
Minimised effort
- With hardwood screw development innovations
- Significantly reduced turning resistance from the friction part
- Longer battery life for screwdriver
Fastest screwing processes
- Dual thread with high and low flanks
- Accelerated screwing proceesses save time - compared to conventional wood construction screws
- The highest technical values guarantee a secure hold, even for oblique and cross grained wood screw connections
Low splitting, little resistance
- The wavy profile on the flanks reduces splitting and screw-in resistance thanks to the cutting function
Patented tip - no pre-drilling necessary!
- Self-drilling tip with ridged core
- Saves time by biting precisely and instantly, even with oblique and cross grained wood screw connections
- Much less splitting and lower screw-in resistance compared to conventional wood construction screws
Surface
BlueWin 700+
Thick-film passivation, blue
- Cr[VI] free
- Anti-friction coating
Other surfaces or production in stainless steel possible on request.
Application examples: RAPID® partial thread
Rafter doubling: Doubling for reinforcement is usually carried out at the top or side of the rafter.
Rafters: Partially threaded screws transfer the wind suction load and shear forces to the substructure via the screw heads.


CLT walls and ceilings: Cross laminated timber (CLT) - ceiling panel Screwed to the walls with RAPID® SuperSenkFix. Schmid screws are approved for all applications in side and end grain (0° and 90°) as well as in CLT side and narrow faces.
Corner and wall screw connections are pulled together joint-tight with RAPID® SuperSenkFix and securely screwed together.
